Search results

Folks, I am wondering other people have their 24v 3 way solenoid in their GinSan LP systems. When someone activates a bay, a 24v solenoid opens(3 way I believe) that allow the air to pass through to my Flojets. However, the air feeding the "solenoid blocks" is t'ed in a way that air is always...

Does anyone use this product on their "Airlift" style door rails to prevent ice build up? Is it safe for the rails? How does it work? https://www.amazon.com/DuPont-Teflon-Snow-Repellant-10-Ounce/dp/B0031T82NO

Folks, I own a 5+1 Touchless Automatic. Since I've owned the place it has been a 24/7 operation. I do have business in the evening, but it usually drops off about 11pm and picks up about 7am. I am wondering if anyone shuts their IBA during overnight hours? If so, why did you decide to set...

Folks, Up until last year, I had a boiler that was severely undersized for my floor heat. I installed a Raypak this year and it seems to be a lot more efficient. I have four questions about operation. Preface: My slab thermostat is set to come on at about +/- 38 degrees and maintain the floor...

Folks, I installed 360plus this year. We had to move the door from an interior installation to an exterior installation to make room for the 360. I am having exit door ice build up in the rails. I never had this before. I am wondering if anyone has a solution to fix this issue. Thanks!

Folks, I have two questions. The first question(two part) is for IBA(I have a 360plus) owners: Do you have a low temperature that you set to close your IBA from use? If yes, what is your temp? I live in Michigan and we are going to have some sustained cold 0-10 degrees. Wondering what other...

Folks, Have a little issue. I've had this happen before on another bay. In cold weather when the weep mizer is active, the bay(only one bay affected) has problem coming up to pressure. As if water has drained out of the pump. Once it is up to pressure is operates normally, that is until it is...

Folks, My backflow preventer is leaking in a few places. Probably ready to be replaced. I am going to have a plumber come in a swap it out. What do I need to know? Are there brands or models that are more hassle free than another? Any advice is appreciated! Thanks!

Folks, It is fall, and hunting season is upon us. I have new LW360plus. All is going very well! I am trying to stay up on maintenance etc, and I have developed a need for a tool that will help me remove leaves and debris from my gantry. I was looking at the Rigid 18v 3 gallon wet dry vac...

Folks, I am planning on installing a backup gas wall heater in my equipment room. Wall space is minimal, and I'd like it to operate without electricity. This would be for emergency backup, in case of a winter power outage. Can you recommend a unit that puts put 25,000-30,000btu that meets my...

Folks, I may be nitpicking here, but my CAT 340 runs smooth. Although, intermittently during a HP cycle, I receive a little vibration/pulsation. It lasts a few seconds, then goes a way, comes back few seconds later. I replaced the valve kit. The head was rebuilt about a year ago. I rebuilt the...

Folks, Been having a tough time with my SS presoak. I have a Hydrominder 506 with a green tip. It isn’t pulling chemicals like my others. Actually it pulls chemical out of the pick tube intially(with nothing in the line). Seems fine, but won’t draw when water level goes low. I am stuck with...

Hello, I have an ACW that was scrolling a message this morning that said "card or coin payment". It normally scrolls "Welcome, Deposit Money or Select Wash". I have the Cryptopay retrofit. Any idea why this would happen? I power cycled it and a a dollar came out of the bill acceptor. Thanks!

Folks, I am going to pull the trigger on a new 360plus. Any add ons that you feel are indispensable? Any add ons that I should pass on? Upgrading from a LW4K with no triple foam. Any other words of wisdom before the trigger is pulled? Thanks!

Hello, I am on the prowl and looking for new option for my small bay. 25'10" x 15'4". I currently have a LW4000 with arch at it farthest extents about 23". Don't know if this is called the wash envelope. Which is pretty good considering the tightness. If I went with a PDQ360, I'd be able to...

Folks, What is the smallest bay you have successfully installed a LW 360 in with the integrated dryers? I have a small bay. Just looking to see who has been successful with a small working space. Thanks!

Folks I have gray and yellow stock prox switch cables in my LW4000. My spare stock are the yellow cables from Kleen Rite. My current cables have a bare ground wire, brown, blue, and black leads. The spare has brown, blue, black and white leads. Do I just follow the same color scheme with my new...

Folks, Wanted to replace the foot valves for my chemical pick up tubes. I bought the CV0063x from kleen rite. These will be fine correct? I have 1/4" IO tube feeding my injectors. These are 3/8" in w strainer, to 1/4" barbed out. Thanks for the help!

Folks, I was wondering if anybody is having coordinator connectivity issues today. My site, and another gentleman I know is having coordinator connectivity issues. Just checking in to see if anybody else is having this today.

What setup do you all use for day to day steel and stainless steel weld fixes. Need to attach some vacs. It would be nice to have something simple to do minor repairs. Thanks!