Search results

Time to change the rollers on this machine the other machine has rollers that have greaseable shafts this one has bearings is this all there is to it or is there something missing What I'm seeing is two bearings one on each side some sort of cap a washer a lock washer and a screw it's worked for...

Hello, My 4000 is drifting in the home position its sensing the front limit its lit on the gantry but its rolling past the flag sometimes which in turn activates the rear limit when it goes past frnt flag. Sometimes both rear and front are on if it catches them just right and then locks...

Hello This is what I use for my spot free pump. I had to change the solenoids Couple months ago. Pump is only putting out about 20psi. Question -does the pump production go down after years? -maybe it's not primed well? I use to have a fan spray no more of a P🥺 Thanks

ANYONE STILL RESLEEVING 310 HEADS PLEASE THANK YOU

LOOKING AT UPGRADING TO A RAZOR SOMETHING THAT WILL SQUEZE INTO A 14.5' WIDTH 25' LENGTH 10' HIGH STAND ALONE OUTSIDE DRYER ANY OPTION, THANK YOU

Hello, any place to get the heat strip on line with the hole in it for the virtual treadle eyes 24v20watt thanks only place i've found in the past was Harrels thru PDQ thanks.

JUST THROWING IT OUT THERE ANYBODY INTRISTED OR HAVE SOMEONE THAT WOULD HELP ME INSTALL A 4000. BE HAPPY TO PAY IM ONE MAN AND VERY FAMILIAR WITH MACHINE BUT WOULD BE NICE TO HAVE ANOTHER EXPERT ON HAND. THANKS, ALL HEAVY WORK COULD BE DONE BY ME WOULD JUST LIKE SOME HELP WITH FINAL WIRING...

Hello time to change the gearbox getting a little drift in home position on the gantry. Are the Wash world high velocity a direct match throughout the 4000. Bolt pattern/shaft size things like that or am I going to regret it. Links if know a place. Thanks Problem If u push on t...

Hello, Time to replace rollers there wore down but still roll fine. The question is: The current rollers all the way around trolly/gantry have bearings and grease lines. I do not have the dryers, my dryers are free standing. From what I understand you only need the bearing...

Hello hope all is well need to replace some of the Wago's in my j4 box anybody have a source Thanks

I finally got it been driving myself nuts with chemical concentrations in tanks. One day its good next day or hour its water down, changed hydro, changed this changed that. Its the water pressure, i have a 4 banger tank for Ps, Fb, Tire, Foam gun all fed by one line thats then split into four...

Hello hope everyone is well Got a call from the wash that 4000 was spraying water it was in the home position no lights were on and no car. I watch the video a car went through Went past the dryers in the machine kicked on but no lights turn on. Only thing I can think of maybe the guy bought two...

HELLO, time to change my rollers QUESTION: some are white some are black? some have a grease line to them some dont? or a place to put the line am i missing something or do the newer ones not need grease? do i need new shafts or just bearing and roller? i do not have a docking dryer. thank...

HELLO, HAVING A PROBLEM WITH MY 506 PULLING THE PRODUCT WHEN IT GETS LOW CHAIN PULLS AND TUBE DRAWS BUT WHAT I NOTICE IS IT KINDA BURPS BACK INTO THE FEED TUBE WHEN IT SHUTS OFF I DO HAVE A HOLE ON THE TUBE ON THE TANK AND THE HYDROMINDER IS BRAND NEW ??? WOULD IT STILL BE A LEAK ISSUE...

HELLO, MY 4000 WITH A ACW4/5 IS NOT ISSUING WASHES WITH CRYPTO *WORKS WITH CASH *SWIPE CARD SAYS SELECT WASH BUT THE BUTTONS ARE DEAD AND NEVER GETS TO VERIFIYING * NO CHARGES ON CARDS THANKS

Hello, need a hand on redoing my joystick some kids broke it off , dont ask i bought some parts from pdq my new swivel button works, emergency stop, and key but my joystick is not activating l,r,u,d??? I notce my contactors on the old one are orange the new ones are black are they...

Hello, i see that there is a bit of water constinly coming out of the blead on the straight swivel when the weep is on. Time for a new one??? Thanks

Hello, my x21 light is not coming on , on my input card thus no frnt eye, rear, or uc is the input card gone bad on just x21 all other inputs on card lighting up and functions ok next question i have another input card but it has a yellow sticker on instead of grean does that matter or they...

Heat tape and reel burned up is there anywhere you can buy one long 27 or 30 foot 1 or do you have two piece two together and recommendation of where to purchase thanks

sorry guys having a brain fart and it's late on the cam is x 15 above x 17 or x 17 above x15 Unplugged the prox to change out wires I forget if x 15 go to the bottom or the top eye thanks