What's new

Pdq 4000 ghost

Joined
Oct 14, 2015
Messages
330
Reaction score
4
Points
18
Location
Mansfield ohio
Hello hope everyone is well
Got a call from the wash that 4000 was spraying water it was in the home position no lights were on and no car.
I watch the video a car went through
Went past the dryers in the machine kicked on but no lights turn on.
Only thing I can think of maybe the guy bought two washers on accident and maybe while he was waiting for the dryer started up but I feel as if he pulled out it should have shut off because the sensors wouldn't have noticed the car but as I said I didn't even seen any lights or stop and go lights on. I actually had to flip the breaker.
Thanks for any thoughts for suggestions
 

Eugene

Old Man
Joined
Apr 19, 2010
Messages
13
Reaction score
3
Points
3
Location
sc
In my 4000 there is a motor started relay up on the wall that the contacts got stuck . It happen twice on two different wash I have . You have the change the motor starter relay it sticks and motor just keeps running wide open . Got to one and the parking lot was full of water it had been running for hrs .
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
1,902
Reaction score
130
Points
63
Location
texas
In my 4000 there is a motor started relay up on the wall that the contacts got stuck . It happen twice on two different wash I have . You have the change the motor starter relay it sticks and motor just keeps running wide open . Got to one and the parking lot was full of water it had been running for hrs .
EXACT same thing happened to me. Contact stuck, while on hp, for over an hour!! Had to replace the starter
 
Top