Search results

We are New owner of existing SS we increase the amount to start from $1 to $2 and also adjusted the amount of time per quarter. Notification horn sounds with 1 minute left of wash time. Customer brought to our attention that if they add additional quarters during the horn notification the timer...

I’m tying to increase start amount and added time on self serve. I adjusted the dip switches and pressed the reset button but it will not reset. Am I doing something wrong?

Looking at new boxes for SS. looking for your opinions ongoing with rotary switch or go with push buttons. What are your opinions?

Is there a code for a PDQ M5 remote to turn on just the dryers?

Is there a code for the remote to turn on just the dryers

Our tech has nor been able to locate the sensors that detect the sides of the car. if anyone is useing PDQ M 5 what sensors are you replacing them with or if you know where to purchase the original type please reply. thanks

Trying to learn a little about a RO system. The digital display for water quality fluctuates between 2 and 8, at what reading should the membrane be changed? Thanks

We have a pdq m5. We have a on demand water heater that feeds into a reservoir tank. Water temp is set at 133 F. But The water in the tank is much cooler. Do you guys have any suggestions to keep the water hot? Is it feasible to feed the hot water directly into the chemical pump. Does anyone...

Ok GUYS. Looking for opinions. On. M5 the arm will rotate the wrong direction once in a while. It has done it on the first soap pass and other times it will rotate the wrong direction on rinse pass. at first I thought it was a error in the wash program but it has done this on multiple...

Looking for your guys opinion Who have traversing spray arms. Do you use a light coating of grease on the rails or silicone spray. We went to a silicone spray thinking the grease would collect dirt but now rails squeak in cold weather

Looking for suggestions On a M5 occasionally the arm will over travel and bang into the end when going left. Only hits the end during a high pressure rinse. Again not every time but randomly . We verified the sensor is set about 3/8” from the plate. The sensor light is on when the plate is...

Can anyone tell me how you recalibrate the ultrasound sensors on PDQ M5 thanks

I was trying to get info on IBD dryer from DryerPros but get message web site is corrupted. Does anyone have the correct or good web site

So guys just want to say your replies have been a great help as someone who is new to this I have 2 questions 1: On a Laserwash M5 what metering tip do you recommend for the soap? We replace the chemical pump and soap now foams really well and covers the cars well. But we are using a lot of...

Has anyone tried using solid rubber tires instead of tube tires? If they would work it would eliminate loss of tire pressure during season changes. I’m wondering if they would get a good grip or would they be to hard and possible slip

Need some suggestions from you guys PDQ M5. Soap and wax is watery and not foaming. Checked air and had good air flow. Noticed chemical pump pressure was low only about 60 psi. Normally runs over a hundred. I’m hoping the check valve might be blocked and can’t open all the way. if not do you...

Guys I just posted this in general comments then realized it might have been better here Does anyone have experience with a PDQ M5? We need to change the oil on the rotational arm gearbox. The ID tag specifies Mobile SHC 630 oil. But we don’t know the quantity needed to fill it. If it helps the...

Hey guys- Any one have experience with PDQ M5? We need to change the oil in a rotation gearbox on a PDQ M5. Does anyone know the amount of oil needed to fill it? The PDQ part number on the gearbox is 800024. The tag specifies Mobile SCH 630 oil. Thanks

Hi guys new to the car wash business so I’m in a sever learning curve. working on a laser wash m5. this is a sporadic problem occasionally during a wash the water will not come on during the rinse cycle. Arm will traverse around the car but no water. any suggestions