Search results

  1. A

    D&S 5000 info

    I have an older D&S but I purchased a newer model with an injector style pump stand. Mine was a hydrominder system and a completely different manifold. You don't happen to have plumbing schematics along with the wiring?
  2. A

    Looking for info regarding the Pulse time between a Hamilton ACW and a D&S 5000?? Cash and...

    Looking for info regarding the Pulse time between a Hamilton ACW and a D&S 5000?? Cash and credit cards work fine, but I have an Everwash add / wash card that won't activate the wash, any thoughts?
  3. A

    SS Soap and Wax plumbing

    That's a great idea, I'll give that a try! I only have 1/2" tubing as well but I always worry about the chance of the ball valves being moved..... Thanks Again
  4. A

    SS Soap and Wax plumbing

    That's exactly how I have mine plumbed now and I also have gravity fed water. But I had to cut the ball valves back a lot more then I thought I would!Actually I'm on the cusp of cavitation but it's working great! Thanks for everyone's help!
  5. A

    SS Soap and Wax plumbing

    Thanks for the pic, my soap and wax have always entered in what appears to be where your wax enters, on the pressure relief side ever since I bought the place? It makes more sense that they enter on the water in side. Thanks again
  6. A

    SS Soap and Wax plumbing

    I will give that a try, thanks! Where do you plumb these in to your system, curious
  7. A

    SS Soap and Wax plumbing

    Can I see some pictures of how you all plumb the soap and wax functions on a self serve system. I have cat 310's and have issues with getting products to the bay. One bay seems ok and the other is an issue
  8. A

    DS 5000 stops in front!

    So reboot it after I set it ! Makes sense
  9. A

    DS 5000 stops in front!

    Thsnks, I thought I did but I'll double check!
  10. A

    DS 5000 stops in front!

    How do I shorten the dwell time on a D&S 5000? I've changed the programming from Std to short, but it still seems to be sitting at the ends for a long time? I have gone in to the programming and made the changes as mentioned (being sure that the other choices are off) and it makes no difference
  11. A

    D&s 5000

    I also had a similar issue, same symptoms, I rewired the gantry and cord to the wall and replaced the prox counter. Fired it back up and now have a photo eye that won't read and when I cover the eye that is reading, the PLC stays lit??
  12. A

    D&S Mitsubishi

    I finally got through to D&S and I have a short in a POS wire for 1 of the safeties in the Gantry, found it in 1 of the eyes!! Thanks for the help
  13. A

    D&S Mitsubishi

    Anybody have any experience with a D&S 5000 and a Mitsubishi controller?? I have power to the controller and I can start all the functions with the relays but the controller itself won't start???
Top