Recent content by n00bie

I don't think the reader is the problem. Otherwise, it would happen to the working one also but it did not. Anyways, I returned the new one and put back the old one. It's working good so far.

Yeah. They did all that, but the problem still remains. Don't know if the controller is bad (on 2nd one?) or they missed something on programing. Got annoyed, I put back the one seems to be dead and it's working again after changing new CC stopper. Not perfectly, but so far it did not cutting CC...

@chaz ... Nope

Is anyone using it? I have one over a year old has problem that a lot of time it cuts off credit card after a few second or minutes. Sometimes the timer screen will go back to welcome screen. I call tech and they say send in for them to diagnose. I figure the cost will be ridiculous to repair so...

OMG! Here I wonder why he didnot responded when he said he will come to help me. You will be missed in here for sure including me since you have helped me so much! Thank you for everything, RIP MEP!

I'll try to take some pictures and message you

Gotcha. I will message you for the Dralco. I need to contact the welder, he is so busy with his job. Do you know someone doing this job Mep?

Dawn it! So that spindle is bent, should I only just get the Dralco mount base from your link and re-use the arm? Do you think it will fit and easy to take out if I do that? If I have to replace it all, can you link me to the stout one? I see few different type Ahh, thanks for point out on...

Addition to @soapy . Do you run water softener? Do you mix your soap or premixed? It helps to run water softener and a little more soap to your mix.

After many times and many years idiots pulled the hose and broke the breakaways, the boom is cracked and that swivel is bent. As you can see that the swivel is bent like 15 degree. It was not that bad until i had a welder welded the crack (you can see the new welding around the square box). It...

A couple dumped a cooler of cooked shrimps into the drain. The car wash smelled so bad for weeks. Customers complained how smelly and trashy the wash was and put 1 star. They did it for 2 times a week around 11pm. Caught the licese plate (thanks goodness) and sent the video to the police to have...

Just a small update. @Randy told me to check hoses and it was one of rusted hose restricting water coming out. Thanks all

Yeah. No check valve under the tank for soap,rise,Wax. But there are check valves underneath each pump and I replaced both

So it's not the rotary switch. I've been digging for the problem but no luck. - replace 2 check valves under the pump - replace 2 sus fittings - open/clean soap solenoid - open the pump head, look through seals they all look good (didn't changed new seals) - change pump's oil (still see some air...

@MEP001 I have similar problem but a little different from KFPanda. As I turn to FOAM Brush back to RINSE, RINSE will not turn on (pump didn't turn on; no starving; water coming out @35psi) RINSE works when I switch to WAX then back to Rinse. Avoid switching to FOAM BRUSH, switching between...