Search results

I’m trying to install some push lok hose. I’m having the hardest time getting the hose pushed all the way up onto fitting. Does anyone have any tips? Is there a tool that makes this easier?

I’m installing a new changer at the wash. This one is double size of the old single unit. I have to cut out a bigger hole on the block wall. Do you guys any advice? Should I cut the hole a little bit larger that the changer to provide some adjustment? My current changer is anchored on the back...

I’ve got a single AC1005 unit that on busy days gets emptied out. I’m wanting to add some more capacity but I’m not sure what’s the best solution. The cheapest would be to add another AC1005 side by side the other. Has anyone ever done this? If so how did you mount it? My other option is to...

I’m having problems with a Hydrominder. The water pressure coming through is barely noticeable. I’m not getting any chemical pull through do to the low pressure. I took it apart and the valve is in pretty rough shape. I’m thinking this is the problem but don’t have a replacement confirm. Anybody...

I opened the barrel on my softener to add more salt today and the water had a nasty film on it. Is it just algae? Anyway to clean it up without dumping the barrel?

Any use paraflex before? I ordered if thinking it was regular nylon tubing but it feels much stiffer. Does it hold up ok? I’m concerned about it potentially busting in cold weather? So far all my nylon tubing has been fine.

I’m installing spot free at the wash. I had a question about the hookup. I purchased a repressurization unit from ginsan that has a low water shut off. Apparently this has to be wired into the float switch. My current float switch just has an outlet plug on the end of it like the picture below...

I’ve got a vacuum that is not sucking near as hard as the others. All three of the motors appear to be operating. Does anybody know what’s going on or have suggestions?

Im about to add spot free to the wash. I think I'm down to a waterway system or a ginsan system. Anybody have preference? One uses a procon pump, the other uses a goulds pump.

I’m having problems out of my changer. It keeps saying validator no com. Whenever I prop it up a little it will work. Anybody have any idea what’s going on?

I’m going to replace the FRP panels at the wash. For you guys that have previously done this, what is the best way? My current panels are riveted in. By looking at my panels it doesn’t appear that the rivets are evenly placed/symmetrical on each panel. Should I pull each panel off and overlay it...

I have a MEI AE 2602 U5M acceptor that's gone bad. Apparebtlyt that model has been discontinued. Anybody have any idea what a suitable replacement would be?

I’m having issues with my changer not dispensing coins. I took it the hopper apart and it appears the red conveyor has worn down over time. Am I correct in assuming that the notches on the conveyor should fit nicely into the track? Mine appear to be extremely worn down. When I opened the...

My wash is shut down due to cold weather. I stopped by today just to check on things and my flojet for the FB is periodically pulsing. Does this mean one of my solenoids is leaking or hung open?

Does anyone have a backup heater that doesn’t require electricity? I currently have a ng heater with an electric igniter which works fine but would be useless in the event the power goes out.

For those that use FRP in bays, what chemical do you use to clean with?

Can anybody give me some advice on drilling a plug lock out? Someone has tried to pick/pry the lock. I finally got key inserted into the lock but I’m unable to turn it.

Needing some guidance with my tire cleaner. I recently moved all my LP functions to a foam gun. I got everything dialed in and working great. A few days ago I went to the wash and tire cleaner was not foaming. All other functions are still working great. I checked the air and chemical pressures...

I’ve got a vacuum that’s staying on and not shutting off. Anybody have any ideas? It’s a JE Adam’s 9213. I opened it up and found a wire that appears to be burnt. Everything else looks normal. As soon as I flip the breaker back on it starts running.

Are there any mods here that can help me with my account? I need to make some changes to my account.