Search results

no soap on high pressure ..hypro 2410 .. seems like its actually putting water in the soap tank ,through the check valve

Got to the carwash yesterday and the customer said they had to rinse with spot free rinse ,due to no water on high pressure rinse..Got in equip room and everythinng was bouncing off the wall,,flojets were hammering ,air compressor running ,no water in resorvoir tank..After checking everything...

My Weep Miser 1000 shows -22/ Had to cut water off to the weep system...Is there a reset or any way to check the Temperature sensor?

I have 4 55 Gallon Trash Barrels at the wash and I am getting way too much household trashbags and large debri...I need to make a TeePee or some type of top for these plastic barrels..anyone that has come up with something or knows where to buy some lids?

I have 2 fragramatics and someone keeps leaving the doors unlatched and open//They are getting the change out..I don't mind the change thieves but do mind them leaving doors open..I put locks on but they just pop the latches off...looks like the latches arent long enough for a secure latch...any...

Cajun Math A Houston construction site boss was interviewing men for a job, when along came a Louisana Cajun. I'm not hiring any Cajuns, the foreman thought to himself, so he made up a test to avoid hiring the Cajun without getting into an argument. "Here's your first question," the...

I have a small 3 bay wash/ I live in Tennessee /sometimes cold winters/sometimes mild/ Is there a way to have floor heat without using the big boilers / I have seen post talking about on demand..can someone give me an idea how I would connect this to my floor heat pipes? Thanks

What would be the best distance to install the POS from the IBA entrance,also what is the best height? Thanks again,Steve

I am still in the process of converting a ss bay to an Automatic Mark 7,,I am adding 12' to the bay to make it 16x38, now the block layer will start soon on the addition and need to know what door opening would be the best? Thanks for all the help

I am in the process of purchasing a used Mark VII and I currenly have a low volume 3 bay SS / My Bays are 17 x 26 //what would I have to do to convert one of these bays for the auto//or would it be better just to add another bay for the auto?

Just Curious if any of ya'll are using FB to promote your wash? Thinking about doin it, didn't know if it was a good thing or not

Hey Guys, I am building an air machine,got everything together in the box, slugbuster,timer, transformer and solenoid...I am planning on putting an air regulator on the air line that feeds the machine from the equipment room and was curious as to what setting the regulator should be set?

I have a MAG 50 Validator that every now and then gets dollar bill stuck...When I check it/ the bill that gets hung up, look like an accordian(rippled) and is stuck in between the validator and the bill holder.

I saw a post a long time ago on here about using mineral oil and food color to refill the display. I know water and oil does not mix/does anyone know how to color mineral oil?The food color I have is water base and only forms the cool little balls of color.

I have been away on vacation to the Redneck Riviera/ I checked the wash out and noticed a milky oil puddle under one of the pumps..I looked at the oil viewing window and it was over full.I opened the fill cap and it was full of real nilky looking oil-water. I have Hypro-pumps -any advice would...

I have lost all my high pressure functions on one bay/checked contactor /I have 220v on the incoming power to the the contactor/when I push the contactor spring in nothing happens -no power to the motor/I changed the contactor with another one with the same results...no pwer on the output...

Just curious as to how many dollars /it would be if I go to the bank with a five gallon bucketful of quarters?