Recent content by rick

Still need controller?

Not sure if Goldline is configured the same, my guess it is not. Do you not have option for Goldline when you pick the ACW type? Not sure of series sequence but the ACW-4 is an older version, you may try picking the latest version if Goldline is not in menu

Got it , Program was buried in UNIOP not were it was supposed to be. Anyway changed program to reflect correct ACW and good to go

There is no place to program end of wash at least not from the uniop. No rewiring plug and play. The manual does say there is a menu for cahier type but software in uniop does not have this. Anyway back down this am to try and solve

The switch is set to active which should energize the cycle inhibit relay all the time and de-energize when car exist. The machine first showed out of service and Hamilton told me to switch to passive which brought back all the functions but wash is not built to run in this mode. Switched...

I have Futura IBA that shows car wash busy on Auto cashier. When I manually turn on the cycle inhibit on the uniop I can wash one car and then it goes back to Car wash busy and I have to manually turn the inhibit back on. The machine had been down a few days for repairs and ended up having to...

That was my next move

That was my next step. I just did not think that was enough of a devit to stop the thing from moving.

I have Futura Automatic that had one drive motor lock and tossed chain. Replaced motor and unit would occasionally get stuck on home and would not move until you would push start it. I then changed the other motor so there would be even pull thinking the uneven pull was causing the problem...

First this is a village not a city. The sewer could be charged the same as everyone, on usage. A simple wtaer meter on well line would do this. They mentioned outflow meter but i would think this would be failry costly and they would want me to install. What is the cost for sewage meters...

Well as far as I am concerned it is already started so any new ordiances should not pertain and per legal advise I have applied for permit that cannot be turned down per ordinances exisiting at this time. They just like to make up the rules as they go:confused:

I have been trying to work with my local water board for over 2 years on reducing my sewage/water bills. It is accounting for 25% of my gross. I bought the wash through bankruputcy several years ago and my water has more than doubled along with gas and electric. I have yet to date taken a...

Just to clairify it is a futura system with individual resevours with float valve and hot and cold solenoids. I have replaced solenoids and float valve. I did find a problem with the soap supply tank a few days latter when bay three started cavitating, low and behold the float in the soap tank...

here we go again i thought I had this problem solved by replacing float valve, solenoids both hot and cold but today it did it again. This time the pump was running but no water was flowing into tank. Switched to rinse and tank filled up. Is there a wiring issue from bay switch that controls...

:confused:I have been fighting this problem for over a year. I have three bay SS that the first pump (first Bay) is running out of hot water. The rinse cycle (cold water) works fine but when you switch to soap the hot water supply does not always keep up with the demand. I have replaced the...