http://i75.photobucket.com/albums/i301/trs246810/20160416_154354.jpg
http://i75.photobucket.com/albums/i301/trs246810/20160416_154414.jpg
http://i75.photobucket.com/albums/i301/trs246810/20160416_154452.jpg
I'm not sure exactly how to swap from the coin mechanisms currently installed in my vacuums?...over to the Slugbuster II? Terminals #7 and #8 were connected to the switch on the coin mechanism it came with. I see that terminals #1 and #5 are jumpered together for 115 VAC. Should I change that jumpered connection to #2 and #5 for 24VAC? Also, which colored wires from the Slugbuster II should I connect to which terminals on the IDX? I know this is probably a lot easier than I'm making it, but I don't want to mess something up. I'm needing my vacuums to be able to accept tokens and quarters. Any help would be greatly appreciated.
http://i75.photobucket.com/albums/i301/trs246810/20160416_154414.jpg
http://i75.photobucket.com/albums/i301/trs246810/20160416_154452.jpg
I'm not sure exactly how to swap from the coin mechanisms currently installed in my vacuums?...over to the Slugbuster II? Terminals #7 and #8 were connected to the switch on the coin mechanism it came with. I see that terminals #1 and #5 are jumpered together for 115 VAC. Should I change that jumpered connection to #2 and #5 for 24VAC? Also, which colored wires from the Slugbuster II should I connect to which terminals on the IDX? I know this is probably a lot easier than I'm making it, but I don't want to mess something up. I'm needing my vacuums to be able to accept tokens and quarters. Any help would be greatly appreciated.