I have a pair of XRS Airlift Doors that I installed in my bay roughly two years ago. I've noticed recently that when a car enters/exits the bay, the doors sometimes stop about halfway on their way down. This usually leaves about a 3/4 foot open gap between the ground and the door. As the weather is starting to turn, I'm concerned about the doors not closing correctly in the winter time. Has anyone encountered this before?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
XRS Airlift Doors - Stopping halfway down
- Thread starter WashSingh
- Start date
garbageman
New member
You need to adjust the cams on the motor assembly. Instructions are in the manual
DiamondWash
Well-known member
Garbageman is correct the cams need adjustment if you don't know how to do it I suggest getting a door company to do it as you can really mess up the door if you adjust them wrong.
Flex- Wand
Member
The cam's . Is this limit switches or something different?
garbageman
New member
yes, they are the limits. they are adjustable with an allen wrench (metric). If the door is that far off it may have missed the upper limit once and rolled over on itself. Usually the cams only need to be adjusted a few inches after initial start up
Flex- Wand
Member
Yes ok . However I have seen this an cycle the door up then down an then it runs normal on a line up day ?
