What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

WW 1.0 Desperate and need help

C

Cal-Redwood

Member
Hello all,
I have a small car wash with 3 self served base and one automatic Coleman WW 1.0 few days ago my Automatic base was being vandalized. She spent more than three hours there to pull all the wires apart. I want to try to put the wires back together to make it work again. The worst thing is all wires are not labeled so I have no ideas where all the wires go to. I am asking for suggestions, directions, information any helps are greatly appreciated. I have uploaded pictures for easy reference. Thank you
 
MY suggestion is as follows:

1. Get wiring schematic from manufacturer.

2. Hire a licensed electrician to re-wire that mess.

It will cost you some money, but needs to be refurbished in the way I described, IMO.
 
Thank you Waxman, I did call Coleman Tech Support and I leave them a message, I am still waiting for them to call me back. Do you or anyone knows where else I can get wiring schematic for WW1.0. Thank again for helping me.
PS: I talked to one of the employee in coleman part department he told me that the technician for WW is no longer work there so I am not sure if I will get a call back from them.
 
Al Mohle is working from home but unless he retired in the past 30 days he is still there. But yes, you have quite a mess. It would be a good idea to get professional help.
 
Cal-Redwood said:
Hello all,
I have a small car wash with 3 self served base and one automatic Coleman WW 1.0 few days ago my Automatic base was being vandalized. She spent more than three hours there to pull all the wires apart. I want to try to put the wires back together to make it work again. The worst thing is all wires are not labeled so I have no ideas where all the wires go to. I am asking for suggestions, directions, information any helps are greatly appreciated. I have uploaded pictures for easy reference. Thank you
Click to expand...
If you do not have any success at getting prints from Coleman let me know and I can make copies of mine and send too you.
 
Tom Thumb said:
If you do not have any success at getting prints from Coleman let me know and I can make copies of mine and send too you.
Click to expand...
Thank you Tom and I really appreciate your offer, no one calling me back from Coleman yet, I will call Coleman again tomorrow and hope I will get some response. I will let you know if I can get any help from Coleman. Thanks
 
Tom Thumb said:
If you do not have any success at getting prints from Coleman let me know and I can make copies of mine and send too you.
Click to expand...

Hi Tom, I have been called Colman everyday and the receptionist transfer me to Colman Tech support but alway to voice mail. I left many messages but never get any response back. Would you please share a copy of your wire schematic for me. I'm willing to share the cost with you. Thank you very much for your help.
 
Cal-Redwood said:
Hi Tom, I have been called Colman everyday and the receptionist transfer me to Colman Tech support but alway to voice mail. I left many messages but never get any response back. Would you please share a copy of your wire schematic for me. I'm willing to share the cost with you. Thank you very much for your help.
Click to expand...
Will try to make copies tomorrow and send asap.
 
The installation manual is available for download on the Hanna Coleman website.

colemanhanna.com

Technical Manuals

Technical Manuals Below is a complete listing of all our service technical manuals for all our equipment. These manuals will help you or your service men with installation, maintenance, and parts for all of car wash equipment including self serve, in bay automatics, tunnel systems, and support...
colemanhanna.com colemanhanna.com


After reviewing the installation manual I think there is enough information there to make all the necessary connections.
 
Last edited:
John J Spokas said:
The installation manual is available for download on the Hanna Coleman website.

colemanhanna.com

Technical Manuals

Technical Manuals Below is a complete listing of all our service technical manuals for all our equipment. These manuals will help you or your service men with installation, maintenance, and parts for all of car wash equipment including self serve, in bay automatics, tunnel systems, and support...
colemanhanna.com colemanhanna.com


After reviewing the installation manual I think there is enough information there to make all the necessary connections.
Click to expand...
Thank you very much John, I will study and hope I can figure it out.
 
Hello all, I have gone through the WW 1.0 manual but still have very hard time to figure out where all wires go to. Anyone that has WW 1.0, please help me by taking picture of inside your Gantry Control Panel (wiring), hoping between both the wiring and manual will help me better figure out where those wires connect go to. Please take picture of the whole wiring of your Gantry Control Panel like the one I have attache below. Your help is greatly appreciated and thank you.
 
Last edited:
Tom Thumb said:
Will try to make copies tomorrow and send asap.
Click to expand...
Tom, Thank you very much for sending me those wiring pictures. Hopefully I can figure out where those wires go and will post update. It will be very very tough. I am not sure I can do it but I will give it a try first.
 
You must log in or register to reply here.
Back
Top