This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
We are very pleased with our Profile-Max. Our top wash for $13 that includes undercarriage, wheel scrub, triple foam, clear-coat protectant and sealer and spot-free rinse takes 7.5 min.; our $10 wash without the triple foam and clear-coat takes 5.5 min. and our basic $7 wash which is just wash and spot-free rinse takes 4 min.
Yes, we have the high-pressure wheel scrubber on our Profile-Max. No problems whatsoever and it does a super job. We previously had brush scrubbers on our PDQ Tandem and had lots of complaints. Our WW distributor recommended the high-pressure scrubber because it covers all sizes of wheels whereas the brush scrubbers are only limited coverage due to their size.
Great! One reason I want to upgrade is so that I can actually clean wheels/rims. On my soft gloss I removed the wheel scrubbers when I bought the wash 7 years ago and not many complaints, but I want to do the best possible job. Glad to hear the touchless actually cleans. On the rubber scrubber that was used on the Profile I tested, the rims were still black in most spots and this is on a smaller wheel.
You also need to make sure you're using a very high-quality alkaline wheel-scrub chem for the best results. Our WW distributor uses ChemQuest chems and their Select 35 is what we use for the wheel scrub.
So, 3 brushes ÷ cleaner on the back,,but takes too long
5 brushes cleans very fast but doesn't clean the back as well.
WTH? How hard is that for Ryko to fix? Bring that top brush down lower, especially on back of cars. Do i get a commission?
All four Buy Up Options can be customized on both Razor and Profile. Two options are just specifically programmed if you wanted to use Underbody or Dryers as a Buy Up, due to specific requirements for both.
