What's new

Unitec Select Wash II Help

bige18675

New member
Joined
Jul 3, 2019
Messages
5
Reaction score
0
Points
1
I have a Unitec Select Wash II go down. The Display Board isn't showing anything and I've changed it out to test with another unit. I do have power going to the unit. Anyone know any tech in North Houston that could possibly help fix this problem.
 

bobcat9095

Member
Joined
May 24, 2012
Messages
84
Reaction score
46
Points
18
Location
texas
Are you talking about just the main display at the top of the unit? That says "Please select a wash" etc?
 

bige18675

New member
Joined
Jul 3, 2019
Messages
5
Reaction score
0
Points
1
Yes. I replaced the main cpu board on the inside and fixed that problem. Now it wont stack the washes. This unitec is running a water wizard 2.0
 

bobcat9095

Member
Joined
May 24, 2012
Messages
84
Reaction score
46
Points
18
Location
texas
Sounds like a programming issue. Do you have an operations manual? If not, you can download one from Unitec's website. You can also set up a time to talk to a tech if you need.
 
Etowah
Top