OCSJOHN
Dual Bay Auto in NC
Hi, I have a new Washworld High Velocity thats having a problem with the triple foam application. I went through the wash today and saw that my triple foam was runny and thin and I was only getting 2 out of the 3 colors. So I went in and checked the air pressure at the pump stand which was fine and also adjusted the mixture settings on the bridge.
Went into my computer and did a triple foam test pass and it worked perfectly. Then, went to rewash my truck and it was thin and runny again. So after repeating this several times its still the same, works great when I run it as a test pass, but in an actual wash its thin and runny. So I'm sort of at a loss on what it could be and am wondering if any of you Washworld or 4000 guys have experienced this or maybe know what could cause this.
Thanks in advance for the help.
Went into my computer and did a triple foam test pass and it worked perfectly. Then, went to rewash my truck and it was thin and runny again. So after repeating this several times its still the same, works great when I run it as a test pass, but in an actual wash its thin and runny. So I'm sort of at a loss on what it could be and am wondering if any of you Washworld or 4000 guys have experienced this or maybe know what could cause this.
Thanks in advance for the help.