SuperClean
Member
I have a soft gloss and i have had this ongoing problem for 3 weeks now.
The wash will put the soap on and then shut down before the brushes start up the brushes will move in but not spin and then give code 7. My tec changed both drive motors checked the gear boxes( no prob) and replaced with heaver oil. After he changed the oil it work for 3 days and then same thing. This week he placed something in so the voltage to the variable drive would stay consistent and again it worked for 3 days and then it shut down. The thing is once it does it once it will keep doing it the odd time it will give a wash but all the brushes move at about half speed and then it will shut down on the next wash. Now that he put the part in it gives code 14 but i think its just because the wash is sitting at the back once you move it forward you can start up the wash again but it will shut down at the back after putting on the soap. If anyone has any other suggestions of things we could try im about to hit something.
Greig
The wash will put the soap on and then shut down before the brushes start up the brushes will move in but not spin and then give code 7. My tec changed both drive motors checked the gear boxes( no prob) and replaced with heaver oil. After he changed the oil it work for 3 days and then same thing. This week he placed something in so the voltage to the variable drive would stay consistent and again it worked for 3 days and then it shut down. The thing is once it does it once it will keep doing it the odd time it will give a wash but all the brushes move at about half speed and then it will shut down on the next wash. Now that he put the part in it gives code 14 but i think its just because the wash is sitting at the back once you move it forward you can start up the wash again but it will shut down at the back after putting on the soap. If anyone has any other suggestions of things we could try im about to hit something.
Greig
