Continuing on the front of bringing another wash back to life.
Having an issue with presoak and tire cleaner in 2/4 bays. Both on same side. They are low pressure but come out of the gun right now. Blew out the lines, cleaned the check valves, solenoids seem to be working, rotary is wired correctly and is engaging the solenoid in the ceiling and on the rack. Traced the fluid lines and it seems to stop right at the ceiling maybe 6 feet above the rack, so product isnt drawing, but air makes it through just fine. Partner and I are out of ideas of what else is left to check.
Other side of the building works great.
Having an issue with presoak and tire cleaner in 2/4 bays. Both on same side. They are low pressure but come out of the gun right now. Blew out the lines, cleaned the check valves, solenoids seem to be working, rotary is wired correctly and is engaging the solenoid in the ceiling and on the rack. Traced the fluid lines and it seems to stop right at the ceiling maybe 6 feet above the rack, so product isnt drawing, but air makes it through just fine. Partner and I are out of ideas of what else is left to check.
Other side of the building works great.