phillipsummers
New member
In the the picture when you see the bottom of the connecting rod the bolt looks like it came loose. I wasnt in the connecting rod when I pulled the pieces outta the pump.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Its been a bad at the car wash!!!!!!
- Thread starter phillipsummers
- Start date
MEP001
Well-known member
I can see in your first photos some damage to the top of the casing that looks like a broken piece got caught between the next piston and the top of the case.phillipsummers said:
I've seen a General pump where somehow both the bolts backed completely out and the connecting rod end just fell off with no damage. It was one of the hardest problems to diagnose I've seen because the pump was perfectly smooth on rinse (The water pressure kept the piston pushed tight against the crankshaft) but it was rough and weak on gravity-feed. I bolted the parts back together and the pump ran fine for years after.
