What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Charcoal RO Pre-Filter Transition

mjwalsh

mjwalsh

6 bay SS w/laundromat
Hopefully someone here can somewhat verify that I am choosing the proper backflush Carbon Pre Filter with the best quality automatic controls. I was hoping I could order an acceptable "Turnkey Carbon Pre-filter Portion" of a car wash 4"x40" membrane RO-Spot Free System from KR along with a "free shipping" large order. I am not seeing it on KR ... so anyone care to VERIFY that the system below is within a proper price range & brand reliability???

 
What exactly are you asking? Are you wanting a complete RO system or just a carbon prefilter? Are you replacing both your RO system and prefilter? Is there some reason you can't CALL Kleen-Rite and ask if they have a prefilter properly sized to the RO system? Are you expecting to get a prefilter FULLY ASSEMBLED from Amazon as the listing indicates and expect it to stay upright the entire trip, and are you aware that if it doesn't, it will ruin the carbon bed and possibly the entire unit?
 
Back in 1987 Specialty Equip installed a complete RO-Spot Free system ... but with a CA membrane (a hyper chlorine sensitivity problem). We followed with a pH reducing Acid System. Now we are going to transition to a TFC membrane to avoid unnecessary extra expense of the 4"x40" CA membrane. The one below & the Amazon one seems to be "turnkey enough for us". Does anyone recommend the Fleck 5600sxt over the Fleck 5600 on the Amazon one. I do not see a reason to replace the whole RO-Repressurizing Spot Free system at this point in time.

How about the following?:

www.aquascience.net

Centaur Carbon Filter System with 9" X 48" Tank & Fleck 5600SXT Digital Control Valve

Helps to RemoveTaste, Odor, Hydrogen Sulfide, Chlorine and Chloramines Features and Benefits •Combines a fine pore structure and high catalytic activity for enhanced adsorption of trace contaminants •Not impregnated •High hardness •Simple equipment design (no pumps or addition of chemicals...
www.aquascience.net www.aquascience.net
 
The repressurizing side is what pumps the water to the bays.

I would go with the Amazon system as it's simpler and you can set it to flush every 6 days. I show a price of $569 and free shipping since I'm a Prime member. The Centaur unit indicates that it ships unassembled.

Kleen-Rite has one with no head/no flush system, just inlet & outlet, $435.
 
I would at least get a price from wood brothers on a 1 or 2 cu ft system. That fleck head should be fine. Don't sweat the backwash too much. I've got one system with no backwash head and another that's been unplugged for Years. I still get several Years out of membranes.
 
Fleck valves work fine when they are new, but they are a pain in the neck when it comes to maintenance. We much prefer Clack valves.

Russ
 
You must log in or register to reply here.
Etowah
Back
Top