What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Can you use industrial blowoff systems in a car wash?

I didn’t see any information regarding how much air is being moved (CFM). I suspect if this type of system was practical some manufacturer would have adopted it. This system looks to be similar to Protovest “Stripper” and several other systems with a movable/profiling top blower.
I suspect the airflow to blow dust off is wildly different than the airflow needed to move water droplets.
 
Eric H said:
I didn’t see any information regarding how much air is being moved (CFM). I suspect if this type of system was practical some manufacturer would have adopted it. This system looks to be similar to Protovest “Stripper” and several other systems with a movable/profiling top blower.
I suspect the airflow to blow dust off is wildly different than the airflow needed to move water droplets.
Click to expand...
No I’ve seen those air knives used to blow of water really good stationary so imagine them getting close to the car.
 
Eric H said:
I didn’t see any information regarding how much air is being moved (CFM). I suspect if this type of system was practical some manufacturer would have adopted it. This system looks to be similar to Protovest “Stripper” and several other systems with a movable/profiling top blower.
I suspect the airflow to blow dust off is wildly different than the airflow needed to move water droplets.
Click to expand...
And also I’ve seen similar systems used in car washes
 
You must log in or register to reply here.
Back
Top