lighthousecarwash
Active member
I just installed one of my new meters from Etowah Valley Equipment, and can't seem to get the audio input to work. The voice prompts work fine, but I can't get music to play over the speaker. Jim is doing some checking for me, but he indicated that not a lot of customer were using this function. Thought I would see if anyone out there had similar problems, or if someone got it to actually work.
I ran cat 5 to each of the bays, punched them all down on a 66 block in the equipment room. I am using a spare pair in the Cat 5 for the music to the timer. I bought some audio connectors that will work for Cat 5 cables, but when plugged into the audio input of Jim's timer, I get no music. I am getting the audio to the 66 block through the headphones jack, which should be a line level input, and also just punching down the speaker wire from the stereo to the block. Neither seem to work. Any suggestions. I know telecommunications, but not an audio/video geek. Please help.
Thanks,
Lighthouse.
I ran cat 5 to each of the bays, punched them all down on a 66 block in the equipment room. I am using a spare pair in the Cat 5 for the music to the timer. I bought some audio connectors that will work for Cat 5 cables, but when plugged into the audio input of Jim's timer, I get no music. I am getting the audio to the 66 block through the headphones jack, which should be a line level input, and also just punching down the speaker wire from the stereo to the block. Neither seem to work. Any suggestions. I know telecommunications, but not an audio/video geek. Please help.
Thanks,
Lighthouse.