MichaelGlenn
Member
I'm not seeing a lot of discussion on this issue, so i'm posting to hopefully get some help.
ACW4 is scrolling this message, RELEASE BUTTON - Hamilton says to unplug each wash selection button, one by one, then the refund button to eliminate possibility of a bad button. Done this. Also tried swapping controllers, no success. I do have a new wire harness from Hamilton but found that it doesn't have all the same connections as the existing harness so i'm going to have to call Hamilton about this before eliminating this possibility.
Anyone have experience with this issue? I did see some mention of the wires behind the relay block as being a possible cause...?
Any help would be great.
thanks-
Michael
ACW4 is scrolling this message, RELEASE BUTTON - Hamilton says to unplug each wash selection button, one by one, then the refund button to eliminate possibility of a bad button. Done this. Also tried swapping controllers, no success. I do have a new wire harness from Hamilton but found that it doesn't have all the same connections as the existing harness so i'm going to have to call Hamilton about this before eliminating this possibility.
Anyone have experience with this issue? I did see some mention of the wires behind the relay block as being a possible cause...?
Any help would be great.
thanks-
Michael