Looking for some answers to a few questions.
1. I beleive we had a problem that caused a fatal shutdown (meaning that the water wizard turned on the acw reset output, causing the auto cashier to go to out of service). What machine errors will cause the ww to turn this output on and leave it on. We had to shut down the auto overnight, and now it seems to be working fine again, which leads me to think that there is a bad prox or electrical short.
I did some simple tests like leaving the treadle on, leaving the undercarriage eyes blocked, etc. None of these caused the out of service.
Note: our touchscreen (red lion) does not work. It powers up, but there is no comm to the plc controller. An expensive bill from coleman for repairs did not fix the problem.
2. The wheel wash eye input flickers on and off during the time a car is being washed. Is this a problem? the wash seems to run fine.
3. Sometimes the cat high pressure pump belts sqeeal a little when switching from one function to another, like when it swithes to the boom and truns the side sprayers off. Which solenoids should i look at?
Any help would be appreciated.
1. I beleive we had a problem that caused a fatal shutdown (meaning that the water wizard turned on the acw reset output, causing the auto cashier to go to out of service). What machine errors will cause the ww to turn this output on and leave it on. We had to shut down the auto overnight, and now it seems to be working fine again, which leads me to think that there is a bad prox or electrical short.
I did some simple tests like leaving the treadle on, leaving the undercarriage eyes blocked, etc. None of these caused the out of service.
Note: our touchscreen (red lion) does not work. It powers up, but there is no comm to the plc controller. An expensive bill from coleman for repairs did not fix the problem.
2. The wheel wash eye input flickers on and off during the time a car is being washed. Is this a problem? the wash seems to run fine.
3. Sometimes the cat high pressure pump belts sqeeal a little when switching from one function to another, like when it swithes to the boom and truns the side sprayers off. Which solenoids should i look at?
Any help would be appreciated.