Search results

If it all stainless and no plastic anywhere, use a Map gas torch and plastic razor blades. Then clean off the excess glue with acetone. You can use a heat gun but it is much faster with a map gas torch...

Just wondering how the loop system would work with motorcycles..

https://www.tp-link.com/us/products/details/cat-5516_HS100-KIT.html get the kit and use the app Kasa. Last year we used the 110V controller to turn on or off the floor heat. It is also controlled by Weep Mizer. We set it up so that when we know it is going to be close to 34 degrees and will...

We got 60w led for the wallpacks in the bays in March 2015 they were 80.00 shipped. it's 3 years now and they have not missed a beat. got them from AMP services LLC in Granite falls NC. They have a lot of different lights. 828 217 4652. Dont know if they even still sell them.

It's all stainless , so it's looks. I would check it out and rebuild what needs to be replaced. you can do it a lot cheaper than new equipment.

Well we picked up the Vactron in Southern IN. Tried it out Monday evening and it worked super. Our pits are 30" wide 48" long 48" deep. it took 60 minutes to do two of them. We took out time and cleaned out every drop. Could not believe how fast it did it. We had Vermeer here 3 weeks ago for a...

We are looking at a used Vactron Hydro Excavator with a 500 gal tank and a 250 gal water tank with a 3000 Psi 6 gal a min pressure washer. it a 550 CFM sucker. Can pick it up for 6000.00 Only tried it out with a 5 gal bucket of water, it sucked it up in 4 seconds.

Just wondering if you do the pit cleaning the old way with a bent shovel and a bucket. Or do you use a vac system to suck it out? What are the cost to have it vacuumed out? I have 4 pits that have to be cleaned, called a vacuum company they said 600.00 for all 4. They are 3'X4' by 40" deep...

Just a follow up, his son did get a hold of the Veterans affairs. The memorial is set up for Monday with his burial Monday afternoon in Indiantown Gap National Cemetery. Thanks for the information spf8298.

https://www.facebook.com/greg.m.calkins

From what I know, A friend works at Indiantown Gap National Cemetery and you right it is free, and all set up for his burial. His only son age 16 is trying to set this up for his father. The undertaker in Tamaqua, Pa. (Who I think is an A## personally) Told Greg Jr. He has to have 4500.00 or he...

This is probably not the place to post it, I don't know where it should be. He was a good customer and I made a good friend the time I had know him. Hi to all. I'm posting this "go fund me" for a friend. A fellow US Marine and father has passed away suddenly. The family has no money for the...

The person on the left looks like he has a hand gun in his right hand. Be happy you did not show up.

https://www.facebook.com/MtCarmelCarWash/posts/1364666326961728

We found 4 big bags of garbage in bay two today. Looked back on the camera and my son posted it on Facebook 4 hrs later we had 38,000 views and now we know who they are. Local police, who are handling it said every bag is a separate offence. Enjoy, and if you have time read all the posts. That...

The only way to prevent failures of MEI in a bay (wet place) is to remove it from the housing, take the lower part you pull out to clean. Use a small flathead, pop the cover off where the clear plastic is over the LED"S you have to press down on the metal clips to remove the locking rod. Use a...

I had almost the exact same thing, only when really busy and all pumps were running at the same time. It was never out of water to the pumps at all it drove me crazy. The soap feed and wax feed 1/4" plastic hosed going to the pumps were the problem. when all pumps were running it would create a...

Not really, the only to know is to crank it up yourself and try it. You will be surprised with the results. Not that much harder to hold the wand from 1200 to 2000 psi.

2000 psi with 2505 . Some old people never pull the trigger. Since I put up the pressure every month it has an increase. Feb was the best month ever.

We installed them in our 4 bay SS only in three bays. First month was 5 percent of bay sales second month was 6 percent of sales third month was 8 percent of sales and last month was 10 percent of sales. Looking at the customers that use them, do not see any new customers. Just CASH customers...