Search results

Hi. I have some old coleman hanna vacuums that I refurbished, but they are loose on their concrete anchor bolts. I have 2 with a sheared off anchor bolt and others where the bolt is loose on the concrete mount. Does anyone have any suggestions for repairing and/or re-securing the anchor bolts...

We had similar issues with bad QC from new units this fall 2023. 2 of mine went bad within 2 months and then the remaining 2 went bad not long after. So I now have warranty replacements on all 4 bays. In pretty much all of the cases, would not pulse the timer upon payment after doing so fine in...

Looks nice! I have the laurel sidemount box as well for my nayax and the same rotary label from KR :cool:. No chance I was investing in brand new coin boxes and installation right away. everything else looks clean and professional on your bay. I bought from another distributor and the onboarding...

They sell new hoppers for $99-136 range at suzo-happ. You can replace the belts and clean the hopper, but if its been in service for a while, it might just be easier to get 2 new hoppers than chasing down issues with a worn out hopper. https://na.suzohapp.com/products/coin_hoppers/EV100-001B or...

Hey. So when yours fail, do you mean they konk out and don't power back on or do they just fail to activate the equipment even though they process the transaction. I'm on my first round of replacement nayax units for all 4 of my bays due to the units just not pulsing the timer coin switch...

Thanks all. I'll turn it over to my designers and see what they come up with for option #2 like below. Investing in a $20-$40/month prepaid fob sounds like a win using a low cost sign approach. If it doesnt bring in the business of at least an additional 20-40/month, I can pull down my sign by...

My self serve car wash is just off a major road serving 7k cars per day. We spoke with another business on the corner of that main road where you would turn down the street to go to my location and they offered to let me use the 15 ft sign pylon for my car wash that is not currently in use in...

yes but I often see complaints about water spray touching the sensitive touchscreen turning off the bay creating user frustration. Also you need to run a 24v from the nayax pulse wire to the rotary timed load so you can bypass the timer, but I thought that also requires special separate relays...

Here is my setup. Laurel nayax specific accessory box from Kleenrite and use a Ginsan GS-402 timer. I do count-down pricing since I dont have a display timer or an external stop button which would be required to effectively do that. My pricing is $3,$4,$5,$6,$10,$15. I get folks regularly...

I was told today by my distributor that that the red wire (load hot) coming from the paraplate goes straight to the 11/21 position (24v common) for my rotary switch. So that was my missing data point and why I failed at hooking up the timer in the bay (because I didnt have anything going from...

Thanks everyone so much for laying out the options! I now know what I need to upgrade and do count-up or at a minimum, fix the wiring and connect timed hot to rotary switch common while I plan/implement the upgrades.

This I agree on, but my predicament is that when I remove the paraplate timer from the equation, I am unable to get the ginsan timer to activate the bay, indicating I must have wired it wrong. The paraplate timer could activate the bay using the two coin switch wires, and when I try to do hook...

Thanks! but still confused because my current original setup with the paraplate timer doesnt have a timed load line connecting to the rotary switch and its located in the pump room above each HP pump (and yet it still can power on the bay equipment using just the 2 coin pulse wires). My ginsan...

Appreciate you responding nonetheless. I think I might have figured it out! My paraplate timer wiring diagram was goof proof since it had coin switch inputs which matched the wire terminals, but the ginsan 402 timer was not as intuitive to me. I incorrectly put one of the coin switch input wires...

Quick update. so we disconnected the pulse (+ and - pulse wires) to the paraplate timer in a single bay and retested the bay. There was no response from the ginsan timer from either the nayax nor the coin acceptor. We then reconnected the pulse wires back to paraplate timer to go back to...

Understood thanks! I'll pull the paraplate timer. I realize replacing the coin boxes are ideal, but I didnt have a 12k budget (between materials and labor) to completely demolish the old coin boxes. The current setup let me upgrade my setup for about $3k labor and parts included and was much...

They are all 24VAC. Thanks for your feedback. Understood about removing the paraplate out of the circuit and making sure my Ginsan timers are operating correctly without the paraplates in the mix. I'll work on taking the paraplate out this month when possible. Thanks for the feedback on the...

Hi all! Thanks for all of your help from earlier. After careful consideration reviewing the pros and cons, I ended up adding a nayax reader to a laurel accessory box by KR and paired it to a new Ginsan-402 timer for count-down mode operation. We left the old paraplate T24120 timers with the 15...

Looks good! Looks good! How did you seal your box from the pre-drilled side. I assume that came with pre-drilled holes for side mount use? I'm planning to use those same laurel nayax side mount boxes but was planned to put them on the side. The top mount is something for me to consider if I can...

Will these JE adams single door bags work below or just the 9200 bags? The single door ones are 10 1/4" flat x 23 1/2" length x 5 3/8" diameter. The 9200 bags 7" diameter. https://www.kleen-ritecorp.com/p-1935-filter-bag-for-j-e-adams-single-door-vacuums.aspx#description