Search results

I thought it did based on the one at my other wash..I guess i was wrong. So the question is Do i need one,the tank is 55" tall x 24" rd..thanks

is it necessary to have one?

Washed out my brine tank this weekend and noticed the 24" grid plate gone. Does anyone know where i can buy another one

Went to wash and found the brine tank overflowing,called local co. they had me manually start system to purge(they told me the valve is sticking or needs to be replaced)Came back this morning and the brine tank was overflowing again. Where is the valve that needs to be replaced and how hard...

Just want to get opinions on what soap you are using for your s.s wash.I'm looking for something that has a good showing when applied to the cars and cleans them as well(I'm using a 501 hydrominder)

Can anybody give me the name of a good insurance co. I use midlothian in TX to shop my insurance, but i'd rather do it myself..thanks

MEP001.. Your air line is coming straight off your compressor to your flo-jet on your tire cleaner? What psi is your compressor set at? Can you do this for your foamy brush and pre-soak?

I have an alarm at my wash and if it goes off the alarm co. calls me..not the local police.do i need a permit from the city if the police are never notified?

Where in TX..I have two in Mesquite

Having the same problem with the lines freezing. I just turned the power off and put a sign "closed" on the front door.

I use a rotozip with a 90 degree attachment

what is the start up time in dallas tx

Same thing happened to me...it was the 1/2 check under the pump.

let us know what happens.

Does anyone know where i can buy the auto shut off fixture that is used for the sink with the handwringer. Thanks

Problem solved...The hose under the soap tank was clogged with soap...Thanks for everyones help..

All functions work in the bay,and the solenoid does energize. I checked it for debris in the solenoid as well

I searched this topic and could not find any answers to this question..I am not getting any soap in bay 4(all other bays have soap) I set it on wash and all i get is high pressure water no soap at all. Any suggestions??

thanks, i appreciate all your help. Here's what i did today-I tried each bay with soap and rinse and this is what i found. bay #5 no soap, took solenoid apart found no debris in it-could that be the(3/4inch) check valve under the pump or the (3/8 inch) check valve on the left side of the pump...

I looked in my soap tank and noticed the water level was way too high(the float was floating) anyway i bought a new valve kit for it. To me the problem seemed simple,(it must be sticking) Replaced it, and today the soap tank was doing the same thing. What else do i need to do to stop this problem..