Recent content by Matfry

As you can see this is a new cp99ou magikist coin mech I have 5 of these and all of them will not accept quarters all the time some will take and some will go to the return and a few will drop without counting. was wondering if anybody else had this problem. This is happening right out of the...

I agree with rainway although ive just started looking into this as well as many local businesses are charging surcharges I was also wondering if their was a way to charge surcharges. Your question was is their a kiosk that can handle surcharges, im not sure but have you called and asked...

the pressure is 69 pounds after the meter

thanks for the info but my lines are all copper with 68 pounds of pressure right after meter would that matter, charts are for pvc

base rate = flat fee i pay before using any gallons other wise the price of gallons are the same no matter what size meter

thank you for the information the reason im trying to get my meter reduced is the base rate charge on the 2 inch meter here is $322.09 per month and a 1 inch is $146.33 per month where my other location(different city 30 miles away) that has same equipment using a 1 inch meter at $35.45 per...

I have a 2 inch copper main then 2 inch meter then 2 inch backflow then it gets reduced to 1.5 inches then reduced again to 1 inch for auto and 3/4 inch for self serve which both have resovoir tanks that feed the pumps so basically im being fed by 1.5 inch already, evrything is copper lines for...

I’m in the process of hooking a gauge up I’ll let you know thank you

Thank you your rinsing with soft water?

Thank you for the information

i Asked what size your using

Was wondering on what size water meters you need? I have a razor in one bay and 3 self serves with a 2 inch meter then in a second location I have a laser 4000 with 1 self serve bay and it works just fine with a 1 inch meter both locations have twin water softeners and identical ro systems and...

Oh sorry I was trying to find a way to open the doors and hold them open on the nice busy days as anywhere from 80 to 120 cars go through to save wear and tear as the doors arent closed for to long anyway, my question was if I use your method to open the doors wont the laser 4000 simply close...

Hello Thank you for the info im sure I can handle doing that but will the laser 4000 shut the doors after someone goes through because currently I have to hold doors open from the laser 4000 cabinet and if thats not done wont the laserwash 4000 send a signal to close the doors? thank you Matt