Recent content by LBF Carwash

I had the proline markVII system and changed out out to a Coleman hanna super saver system. Will the bay meters work on the new system? Or will I have to change them out as well?

Ok thank you for the help!

Thank you, I do believe I need to replace the CPU, my only problem is I do not know what the program is. What do I need to do in that situation? Can I buy one already programmed?

I have an omron cpm1a and it keeps blowing fuses inside of it. The supply voltage is working and at the correct voltage, is the power supply board bad? Any help would be helpful!

Yes I have checked the contactor and the overloads. When I checked between A1 and A2 I do not have 24v. That is what makes me think it is the switch

The wire colors match from the rotary switch all the way back to the contactor. I’m going to unwire the switch and check it. This has thrown me for a loop.

I have checked the voltage and I have the correct voltage. When I turn the rotary switch to high pressure it doesn’t do anything

Hello, new carwash owner here. I have a Coleman Hanna system that is 25-30 years old. Upon purchase of the carwash only 1 bay was working properly, but I have since gotten 3 of the 4 working correctly. My issue is with the last bay and no high pressure. When I put coins into the bay meter and...