Recent content by DJGall

Fixed. I'm a big dummy. Didn't properly clear/reset an alarm/fault.

Hello Gents, Needing some troubleshooting help. My goldline ACW is reading "equipment not ready" and the Red Lion says "home prox needs replaced". So, I replaced the home prox and replaced its cable. The error on the Red Lion is still saying "home prox needs replaced. I have checked all my...

It's been a while since I have logged on. Where did the "Jim Coleman" forum go? I have an issue with my Water Wizard need group brainstorm.

Now that you all have tested these "Jarvis" units for a few years, what are your thoughts? They still the best thing around for replacing Scottsdale 320W metal halides?? Any failures??

This is on a Goldline ACW with a dial up phone line.

Anyone else experiencing unusually long process times this weekend? I noticed it beginning Friday. It's taking sometimes 2 minutes or longer. Thoughts?? Is it card volume nationwide causing a slowdown? Or, something wrong with my phone line? Thoughts anyone? Thanks! DD

Contact Jim Barton; he's been in the water filtration, softening business for 15+ years. He's my goto for softeners and RO units. Tell him Dirty Dawg sent you. Jimmy Barton MidAmerica Water Technologies, Inc. 8003 N. Wilshire Court, Suite E Oklahoma City, OK 73132...

So, if I currently have 1034r timers, and, want to install CryptoPay, is it best to go ahead and replace the timers with Dixmor at the same time? Which timer from Dixmor? The LED6 or LED7? Looks like the LED7 would require considerable modification to the Coleman bay doors. Also, is it as...

Anyone installed CryptoPay card swipers on 1034R JCC timers for the SS Bays?? Any caveats or pointers you'd like to share before I pull the trigger on this project? Thanks! D.J.

Thanks MEP!! I don't know what made me remember to do this, but I'm glad I asked. How did you know about this? I can't find it in my WW1.0 documentation, the manufacturer's documentation, or anywhere else. Thanks!

Look at the link and download the pdf for the 140-160 unloader. Would that be items 21, 22, and 23?? http://www.pa-etl.it/en/catalogo/unloader-valves-22mpa-3130psi/vb-140-160.html OK, this is the pdf link. Choose the CE Technical Booklet and scroll to the bottom of the pdf for the parts...

Hey guys, I'm getting ready to replace the unloader/pressure relief valve that's in line right after the pump. I have a brand new one in hand. Did I dream that something internally has to be removed from the unloader before installation?? It's been so long since I replaced the unloader, I...

As soon as you get a chance to do some preventative maintenance, pull the hoses to the rotary actuator and put about 30 drops of pneumatic oil in each hose, and then reconnect. This actuator needs lubrication, as it has nothing but dry air operating it. Any light oil is better than nothing...

I paid $162 each from my distributor, KO Pressure Supply. But, be sure that you get the "double flange" wheels for your "drive side". Otherwise, the Water Wizard will go down the rails all out of kilter. They may say "we don't offer the double flange wheels anymore"....but, that is B.S. I...

Carl, are you sure the thermostat that is used to turn the "winter wizard" on is constantly calling for more heat?? Does your winter wizard have the small electrical control panel with the door that allows you to access the contactor and relays that turn on the circulator pump and electrical...