Recent content by collegefund

thanks Randy, I'll give it a whirl.

Have a lock on one of my vacuums that none of my Medeco keys works in, looks like I need to drill it out and don't want to pay the locksmith $100.00 +. Could use some suggestions, pm me, thanks.

what does look like?? cat 530 pump.

got it work properly, thanks

Just replaced the diaphram pump on my foamy brush, what should my air pressures be set at. they might've jack up to help the pump that was going bad. thanks

I can't tell you if there is a difference, go to the local electrical wholesaler (not the big box store) and ask them. But they're hooked together for a reason. single pole breakers are around $7 or $8 at the big box store.

you should remove the 2 pole breaker and replace it with the properly rated single pole breaker for the wire used in the circuit. you can put a smaller rated breaker on larger wire (20 amp on #10) , but you can not put a larger rated breaker on smaller wire (30 amp on #12). What size wire is...

it looks like a J.E. Adams vacuum, I have on thats very similiar. Kleen-rite carries the bags (VA40010), and may be able to get the other parts you need.

need some help determining if my weep system is set up correctly. It's my first winter (midwest), bought the wash in the spring. would like pics of what it should look like and what my water pressure should be. I do have a Dixmor weep mizer that I will be using. thanks for your help.

I'm looking for a treadle for my LW4000, just welded on mine today (not the first time). need a spare until I save enough $$ for a VT. thanks

65 Impala ss I have one of those too. Bought mine in 1983 from a farmer that I worked for. Mine is Blue w/black interior, 325hp/396 with a powerglide. Haven't drove it much lately, I bought a carwash.

I think my LW4000 is about wore out (it's over 16 yrs old), it's starting to need alot of repair. would like to get some opinions on other touchless machines, pros & cons. thanks for your time.

ScottV, I'm looking to replace my LW4000, is the LW360 a good machine?? please advise, thanks

I got it going, thanks for all the help!!:):)

Mike, if the festoon was bad, why does it work fine on the soap and rinse passes. what output tells the trolley to move during the wax application?