What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Belanger Saber

Z

Zal

Active member
Anybody have any luck getting good presoak on these? I can get good soap on drivers side snd almost none on passenger side. Belanger tech did not impress. Want to pass you off to distributor. Reminds me of PDQ before they started treating customers properly. So looking for some experienced operators to get me going the right direction
Thanks in advance!
 
Zal said:
Anybody have any luck getting good presoak on these? I can get good soap on drivers side snd almost none on passenger side. Belanger tech did not impress. Want to pass you off to distributor. Reminds me of PDQ before they started treating customers properly. So looking for some experienced operators to get me going the right direction
Thanks in advance!
Click to expand...
Is it both presoak passes ?
 
Zal said:
I’m not too familiar with Belanger. Every other IBA I have is PDQ
Click to expand...
What pump speed are you at? Have you checked the check valves on the wall manifold for the presoak? Have you checked the screen and scrubby pad in the wall manifold? Was it working before and it just started doing this?
 
Just bought the place Not been good at all with presoak. Pump speed I think was 29. If I raised it then no presoak (soap)Lower didn't change anything If manifold is plugged wouldnt I loose both sides? Does it tee at manifold to both sides? Any screens in manifold?
 
Last edited:
Zal said:
Just bought the place Not been good at all with presoak. Pump speed I think was 29. If I raised it then no presoak. Lower didn't change anything If manifold is plugged wouldnt I loose both sides? Does it tee at manifold to both sides?
Click to expand...
What is the pressure on the gauge that’s on the injection manifold when running presoak?
 
  • Like
Reactions: Zal
I’ll check things tomorrow and put the new gauge in. Then I can check back in
Thanks so far for the help
 
You must log in or register to reply here.
Back
Top