What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

WW 1.0 Acting Weird Solenoid Problem

B

Buzzie8

Member
I had a call yesterday and a regular said that my wash wasn't working correctly but could not give me a clear description of the problem . I stop up and can't find anything wrong. Today, I see that no water is coming out of the side oscillating arms on some passes (when it should be) and is working on other passes. I am thinking solenoid or cable problem. Any ideas? This is a first for me in 8 years. Solenoid has never been replaced. I tried inspecting the cables and ran some cars with good results then it happened again. Not sure what to do.
 
I would dissasemble and clean the solenoid controlling the side sprayers. If that doesn't fix it I would replace it or install a rebuild kit.
 
I found the problem today. A loose low voltage wire in a wire nut fell off while I was looking around in the gantry control panel. It looked like it got wet and rusted out. Bad connection, hopefully problem solved.
 
You must log in or register to reply here.
Back
Top