escarwash
New member
I cannot get our weep solenoid to work. This summer, the weep solenoid failed and because it is normally open, the weep turned on. I replaced the solenoid with another, different model, 24V Normally Open Solenoid from Kleen-Rite. I checked to make sure it was installed the right direction, and to make sure it is getting power. but it still wouldnt close. I didnt worry about it because it was summer, but now that it is getting cold, I need to get it working. Any ideas?
This is the valve I used: http://www.kleen-ritecorp.com/p-468...ragm-valve-normally-open-stainless-steel.aspx
This is the valve I used: http://www.kleen-ritecorp.com/p-468...ragm-valve-normally-open-stainless-steel.aspx