Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Weep or non weep
- Thread starter splash1
- Start date
MEP001
Well-known member
It will eventually damage the pump with a non-weep gun, unless you use an unloader instead of a bypass regulator. Pumping water at high pressure generates a lot of heat, and with no water flow it will melt all the plastic and rubber parts in the pump if someone leaves the bay running. It will even happen with a weep gun:
An unloader will relieve the pressure on the pump and keep it from getting as hot, but it's riskier. If something fails you might still end up with a ruined pump.
An unloader will relieve the pressure on the pump and keep it from getting as hot, but it's riskier. If something fails you might still end up with a ruined pump.
DiamondWash
Well-known member
A little bit of duct tape and some super glue and that will work good as new.
