Water Wizard 1.0 running full track on every wash

[Morqtrs]

Our Water wizard 1.0 is washing vehicles and going full track length on all of them. The can IRs seem to be fine. Any other suggestions?

 

[Greg Pack]

I'm rusty on 1.0 programming but I would suspect an issue with the measurement eye not working. The can eyes would prevent the boom from dropping.

 

[Morqtrs]

Boom drops OK in contours with the car it’s just that it runs all the way to the end of the track and then comes back when even if the short car is there

 

[Greg Pack]

check measurement eyes