Vend-it Controller Board

[bneckrock]

I think I fried my IVS Vend-It controller board. It's about five years old. My clumsy mistake. Anybody got any ideas? I don't know who made it or if it was proprietary to IVS.

I've never had a moments problem with the vendor and I'd like to save it.

What does a Shur-Vend small rear load run?

Is anybody still at GinSan?

Thanks!

 

[Randy]

Hey Bill,
I?m not 100% sure but I believe these guys?s make the control board for the IVS vender. www.rpdvending.com/

Or you can give these guys a call, they might have something that will work
www.inonetechnology.com/

 

[Dan kamsickas]

Bill

I assume you are talking about the Coinco board in the VR1000. Coinco would be the best one to contact about that as we do not have any spare parts for that unit anymore.

 

[bneckrock]

For what it's worth, the issue was resolved. I contacted the service department at Coinco and they are still supporting the board they sold IVS. Wanted $110 to rebuild, I sent it in and I guess I fried it beyond repair. Anyway, they supplied a rebuilt for $125 and sent along a bunch of documentation,too. I installed it, programmed the prices and everything is A-OK.

Dan @ Ginsan, thanks for the info. Coinco is a real pleasure to work with, too.