Triple foam issue

[Thunder sudz]

You have some good starting points to start your troubleshooting between the 2 threads you are asking the exact same thing in.

Glad you're up to date on things.
I changed my tips to green and have great foam flow form the triple foam

 

[Thunder sudz]

There are way too many factors, no one on the internet is going to be able to tell you which tip to use. You can probably get a starting point if you say the exact chemical you are using. If you are using a chemical supplier, they should be dialing this in for you. Red tip is like 20:1, and you went to 120:1, and now are considering 90:1 - those are very huge gaps. What pressures are you running flojets and air injection at?

Chemical is 30 and air is 20

 

[Blanco]

Chemical is 30 and air is 20

A response after over a year ago? Isn't this what you get paid to do? The problem still is not fixed?

 

[Thunder sudz]

A response after over a year ago? Isn't this what you get paid to do? The problem still is not fixed?

I didnt even notice the date on the post. And no I dont get paid I was just helping a friend out and I did fix the issue the next day. And I do value your input