Car_Wash_Guy
Well-known member
Need some help with my Ryko Soft Gloss.
Passenger front brush not coming in when the gantry comes back to the front and the machine is shutting down and saying wash complete. Throwing a code 17 ( Any Arm Proxy ).
I was thinking its a bad air cylinder possibly thus not allowing the arm to come in and showing the proxy code?
Adjusted the arm so it swings in slightly with the air off. Checked the air cylinder and I noticed no blow-by on the seals. Put some air tool oil pre-manifold and in the lines before they hit the air cylinder and hooked it back up. Ran great for a few hours and then started doing it again. Stumped
Thanks for any help in advance.
Passenger front brush not coming in when the gantry comes back to the front and the machine is shutting down and saying wash complete. Throwing a code 17 ( Any Arm Proxy ).
I was thinking its a bad air cylinder possibly thus not allowing the arm to come in and showing the proxy code?
Adjusted the arm so it swings in slightly with the air off. Checked the air cylinder and I noticed no blow-by on the seals. Put some air tool oil pre-manifold and in the lines before they hit the air cylinder and hooked it back up. Ran great for a few hours and then started doing it again. Stumped
Thanks for any help in advance.
