ryko code 02

[diamond joe]

I just got a code 02 on my beeper. in the referance material it states"this is a status 02"...very helpful.has anyone ever gotten this code and what does it mean?

 

[RykoPro]

You need to check the four digit code.

 

[diamond joe]

you mean with the hand held?

 

[RykoPro]

Yes or if you have a CAW4 you can print them by accessing the PLC through the network.

 

[DiamondWash]

It would be nice to have a sheet on what those 4 digit code mean if you could provide it and have bill put it on the library section so any Ryko owners who have handhelds could go there to either print it off or as a referance

 

[RykoPro]

I have no problem with posting this but it is very long (82 pages). I could email it to any owner who wants it or the two digit codes. Both are in a PDF format. I also have all schematics, both electrical and pneumatic ( I need the build date of the machine shown on the serial number tag). I also have all d timer and set up question explanations ( I would need the program number and revision level).