Ryko CMD

[Ryko CS]

The 120VAC should go to the input of the transformer. The output of that transformer is 5V and should go to the terminals on the board. The various messages are played by different combinations of 25VAC inputs for the (1), (2), (4), (8) and (16) inputs (plus common).

 

[CMDguy]

The 120VAC should go to the input of the transformer. The output of that transformer is 5V and should go to the terminals on the board. The various messages are played by different combinations of 25VAC inputs for the (1), (2), (4), (8) and (16) inputs (plus common).

I display my messages with a simple USB cord