Replacement for old DH Controller

[NessaForever]

Does anyone know of a replacement for these controller from DH? I’m guessing I could probably use a IDX Multiplexer?

thanks

 

[MEP001]

8 Multiplex Control with Delay | GinSan | GS-16D

Ginsan GS-16D Multiplexer with delay. Designed for reverse osmosis pump control. Find a great low price on GinSan parts at Kleen-Rite!

www.kleen-ritecorp.com

or

24V Multiplex Controller - IDX MX8 | Kleen-Rite

The IDX MX8 monitors 8 inputs from bay location to tire cleaner or any other low pressure system with a 2 second delay. Buy it online from Kleen-Rite!

www.kleen-ritecorp.com

 

[Twodose]

I have the same controllers in my wash, I would replace with a IDX MX8, but they are a different hookup.

 

[NessaForever]

Thank you.

8 Multiplex Control with Delay | GinSan | GS-16D

Ginsan GS-16D Multiplexer with delay. Designed for reverse osmosis pump control. Find a great low price on GinSan parts at Kleen-Rite!

www.kleen-ritecorp.com

or

24V Multiplex Controller - IDX MX8 | Kleen-Rite

The IDX MX8 monitors 8 inputs from bay location to tire cleaner or any other low pressure system with a 2 second delay. Buy it online from Kleen-Rite!

www.kleen-ritecorp.com

 

[NessaForever]

Yeah I know they won’t be exactly the same but I think I can get them to work to connect to my master air solenoid

I have the same controllers in my wash, I would replace with a IDX MX8, but they are a different hookup.

 

[Jsshac]

Does anyone know of a replacement for these controller from DH? I’m guessing I could probably use a IDX Multiplexer?

thanksView attachment 6354

You could convert to a flowjet pump and not use them

 

[Randy]

I'd go with the IDX MX-8. I'll never go back to using a Flojet pump, unless it's on a Foam brush system.

 

[NessaForever]

I'd go with the IDX MX-8. I'll never go back to using a Flojet pump, unless it's on a Foam brush system.

thanks. The previous owners actually had flojets working with these controllers.

 

[NessaForever]

You could convert to a flowjet pump and not use them

The previous owners had flojets with these controllers for foam brush, tire cleaner and presoak

 

[Jsshac]

The previous owners had flojets with these controllers for foam brush, tire cleaner and presoak

He probably just unplugged the 120v pump and installed flowjets

 

[Randy]

The previous owners had flojets with these controllers for foam brush, tire cleaner and presoak

We use Procon pumps now.

 

[Twodose]

Been using goulds NPE/NPE-F316L SS, never had one go bad, not even a seal, They are the pumps that came with the D/H equipment in 1994.
I have used ARO diaphragm pumps in another location, but damn, they are expensive.