Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Raypak Troubles
- Thread starter Waxman
- Start date
Bubbles Galore
Active member
You don't have a pilot right? It won't spark at all? The transformer isn't blown is it?
Waxman
Super Moderator
It's fixed.
The tech jumped 24 volts from the hi limit switch to the module and it started. He took off the jumper wire and it died. He re-started it and it's been fine since.
The theory now is water/ice in the regulator caused both boilers to shut down. Once I started to thaw the regulator, one kicked on but not the other, due to the fact that there was still inadequate gas flow with a still partially (?) frozen regulator. I guess if that pressure switch is just a little off, the pressure will not allow the switch to activate the igniter.
Who knows. I'm just a guy waxin a few cars.
The tech jumped 24 volts from the hi limit switch to the module and it started. He took off the jumper wire and it died. He re-started it and it's been fine since.
The theory now is water/ice in the regulator caused both boilers to shut down. Once I started to thaw the regulator, one kicked on but not the other, due to the fact that there was still inadequate gas flow with a still partially (?) frozen regulator. I guess if that pressure switch is just a little off, the pressure will not allow the switch to activate the igniter.
Who knows. I'm just a guy waxin a few cars.