Quick connection lock

[Scott.Downey]

I own a older car wash that has a more modern building with bays that have heated floors that we run at all times / temperatures it also has an old side with 3 bays that lack heat. We typically turn on these bays during warm spells during our busy times. As it cools at night we shut down these bays so we dont have a ice build up/ safety issues. We have added quick connect coupling to the back of the pumps making it easier to shut down. I would also like to add these couplers to the wands which we remove nightly. Does anyone make a quick connect lock that i could secure around the coupler to prevent someone from walking off with the wand?

 

[MEP001]

I put a quick connect at the bay above the swivel. I can reach them with a small stepladder.

 

[mjwalsh]

In colder climates, I can see where the quick disconnect could also make "blow out easier" bypassing the nozzle that slows down the blow out of the specific line.