MEP001
Well-known member
Is there such a thing as a completely rust-proof standard air chuck? I've bought all brass ones thinking they wouldn't rust, but the valve spring and balls inside were steel and wouldn't separate after a couple years.
Quality rust-proof air chuck
- Thread starter MEP001
- Start date
eckert16
Active member
McMaster.com has some listings ... maybe they would respond to an message inquiring if the spring and ball are stainless?
Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,208
- Reaction score
- 788
- Points
- 113
A couple of years My Air machine wire braid hoses and chucks are pretty trashed beat up at bout 2 years and need to be replaced, So, I never had an issue with rust issues because they don't last that long.
MEP001
Well-known member
I have need of some air chucks that will be stationary for years. I've seen this a few times, and when they aren't ever handled they always rust up and can't be disconnected or leak badly when re-connected.
Greg Pack
Wash Weenie
Have you tried to use an all stainless high pressure Quick Disconnect fitting?
MEP001
Well-known member
I did, they're a lot more expensive than air chucks, but it would work for what I need. I already use them in the bays to hook up my washdown hose. They're brass but they hold up well. I had gotten some all stainless ones that weren't all stainless and rusted in the bays, so I know which ones NOT to use.
MEP001
Well-known member
It is discontinued.
