I.B. Washincars
Car Washer Emeritus
I want to mount a couple of 320W Scottsdales on a 4" square pole, facing straight down. Does anyone know if there is a pole mount kit available or will I have to get something fabbed up?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Pole mount for Scottsdales?
- Thread starter I.B. Washincars
- Start date
MEP001
Well-known member
LSI makes a lot of different pole fixtures, so I doubt they make a pole mount for a canopy fixture. I couldn't find anything like that on their site. It should be easy to fab though.
If it's for lighting a lot, I don't think I'd use a Scottsdale. They're designed to cast light in a 270° sphere to light the ceiling as well as the ground. A lot of light would be wasted. A usual pole light would cast all its light straight down on the ground where it's needed.
If it's for lighting a lot, I don't think I'd use a Scottsdale. They're designed to cast light in a 270° sphere to light the ceiling as well as the ground. A lot of light would be wasted. A usual pole light would cast all its light straight down on the ground where it's needed.
I.B. Washincars
Car Washer Emeritus
I have a lone vac island out back of one of my washes. It has two 175W MH lights. One has a broken lens which costs over 1/2 what a new light costs. They are just adequate at best to light the car itself. I would like to get more coverage back there and I already have those 320W lights in my auto so I wouldn't have to stock yet another bulb.
MEP001
Well-known member
You might like something like this:
http://www.lsi-industries.com/media/233/Greenbriar Brochure.pdf
You can order it with the same ballast/bulb you already have.
http://www.lsi-industries.com/media/233/Greenbriar Brochure.pdf
You can order it with the same ballast/bulb you already have.
Assuming these are ceiling mount fixtures already you can just buy the scottsdale superkit This will retrofit the bulb, ballast etc. into an existing fixture.
http://www.lsi-industries.com/media/2366/scottsdale_superkit_unballasted_147421_2_05.pdf
http://www.lsi-industries.com/media/2366/scottsdale_superkit_unballasted_147421_2_05.pdf
I.B. Washincars
Car Washer Emeritus
Cfcw, as I stated above, one of the fixtures needs a lens as well. The fixtures are also not vertical and I can't imagine that there is room for a vertical bulb.
Oh, and another biggie. I will have to hire a bucket truck to do the swap. Trying "this and that" would be quite expensive. I would like to have two new fixtures and be done with it.
Oh, and another biggie. I will have to hire a bucket truck to do the swap. Trying "this and that" would be quite expensive. I would like to have two new fixtures and be done with it.
