Pdq g5
- Thread starter stud
- Start date
Windows 7 can work with all of our web based programming product lines.
You have to ensure your network card (of computer) is on the machine network.(and have a cat 5 cable plugged into the network, or a cross over cable if you are plugged directly into the G5 controller)
Typical machine network address for a site computer is 192.168.055.100.
Just be sure that there is not another computer with the same address on the network.
You have to ensure your network card (of computer) is on the machine network.(and have a cat 5 cable plugged into the network, or a cross over cable if you are plugged directly into the G5 controller)
Typical machine network address for a site computer is 192.168.055.100.
Just be sure that there is not another computer with the same address on the network.
