Oscillator motor/gearbox
- Thread starter washnvac
- Start date
Tom Thumb
Active member
The price was $83.00 plus shipping and very easy too install.
Greg Pack
Wash Weenie
look on page three of this thread for some pics...
This is a game changer thread for wizard owners.
I changed three gears on three bad oscillating motors today. Took less than 10 minutes on each. Took 3 screws out with an impact wrench. Push out the old gear. Clean the brass debris from the inside and put everything back in reverse. The smooth edge of the gear goes downward. Add gear oil and tighten screws back up. This was easy. I regret throwing away so many reusable oscillating motors over the years.
I changed three gears on three bad oscillating motors today. Took less than 10 minutes on each. Took 3 screws out with an impact wrench. Push out the old gear. Clean the brass debris from the inside and put everything back in reverse. The smooth edge of the gear goes downward. Add gear oil and tighten screws back up. This was easy. I regret throwing away so many reusable oscillating motors over the years.
