Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Oscillator motor/gearbox
- Thread starter washnvac
- Start date
look on page three of this thread for some pics...
This is a game changer thread for wizard owners.
I changed three gears on three bad oscillating motors today. Took less than 10 minutes on each. Took 3 screws out with an impact wrench. Push out the old gear. Clean the brass debris from the inside and put everything back in reverse. The smooth edge of the gear goes downward. Add gear oil and tighten screws back up. This was easy. I regret throwing away so many reusable oscillating motors over the years.
I changed three gears on three bad oscillating motors today. Took less than 10 minutes on each. Took 3 screws out with an impact wrench. Push out the old gear. Clean the brass debris from the inside and put everything back in reverse. The smooth edge of the gear goes downward. Add gear oil and tighten screws back up. This was easy. I regret throwing away so many reusable oscillating motors over the years.
