Need Nayax Machine installer for Vac Bays

[Keno]

WOW bold of you! can't believe they hold!

We've had 1 ac/dc converter go bad, and some of our nayax units have been installed for 3.5 years+ at this point. They are protected enough in the box if they are mounted high and wires are kept neat and high also

 

[RRamos15]

We've had 1 ac/dc converter go bad, and some of our nayax units have been installed for 3.5 years+ at this point. They are protected enough in the box if they are mounted high and wires are kept neat and high also

We’re installing the new monex readers and have to copy the nayax setup like you.

 

[RRamos15]

We've had 1 ac/dc converter go bad, and some of our nayax units have been installed for 3.5 years+ at this point. They are protected enough in the box if they are mounted high and wires are kept neat and high also

Did the relays you bought have a housing or you just left them in the box as is?

 

[Keno]

As is in the box, stuck on with standoffs to the side or top of box.

 

[steve91932]

Not going to lie. It was almost impossible to find AC TO DC CONVERTERS at such low volts and you have them just right here lol! What a baller!

FYI - You can simplify your installation by powering the relay directly from the Nayax unit. Supply the Nayax with 24VAC and use the light blue VCC (5VDC) to power your relay. Works great.