Nayax wiring for coin counting

[schiatds]

Hello,

Long time washer first time posting. I have installed Nayax VPOS multi price devices into my coin boxes. 24v going in, I have a micro coin qr coin acceptor and various timers between the sites (LED 7,9 Gs401) and counters inside but they are also counting credit now.
In order to report coins through Nayax core do I simply connect the pulse wire to pulse2 on the harness? I don’t seem to get accurate reporting with this. Maybe a need a resistor?
Open to ideas on how to track coins coming in thanks

 

[Keno]

Cantbreak80 has a post on here on how exactly to do it including all the settings, you need a relay in the middle before pulse 2 wire

 

[cantbreak80]

Nayax VPOS Cable:
Pulse 2 (Blue Wire) & VCC (Teal Wire) connect to a 24vAC SPST relay normally open contacts.

Dixmor 7 & 9 timers coin pulse input is 24v COMMON…
Connect the relay coil to LED7 or LED9 Pin 2
Connect 24v HOT to the other relay coil

Ginsan GS401 timer coin pulse input is 24v HOT
Connect the relay coil to GS401 terminal 4
Connect 24v COMMON to the other relay coil

Nayax Core Settings:
Parameters>Pulse/ccTalk
Credit per Pulse2 = 25
Pulse IN2 = 1 (This will report every quarter deposited.) [Information Overload!]
Pulse IN2 = 4 to report $1 increments
Pulse IN2 = 20 to report $5 increments. [My customers prefer this]

 

[schiatds]

Wow thank you! I will give it a try. I have the VPOS pulse wired straight the the timer working (multi price) so I thought Coin acceptor to Nayax for reporting wouldve worked but that wouldve been too easy!